OPERATION/CONFIGURATIONC4631M (11/09)Server Software ApplicationDX4104 SeriesDigital Video Recorder
10 C4631M (11/09)PTZ CONTROLThe PTZ control is available for cameras that support PTZ functions using Pelco P and D protocols. It is also available fo
C4631M (11/09) 11ON-SCREEN KEYBOARDThe unit provides an on-screen keyboard to perform the following functions: • Select a user name and type a passwor
12 C4631M (11/09)OperationFigure 5. Hard Disk Option Partition NotificationUNIT STARTUP AND SHUTDOWN1. To start the unit, connect the power cord to a
C4631M (11/09) 13WORKING IN THE APPLICATION WINDOWBy default, the toolbar is displayed at the bottom of the application window. It cannot be moved to
14 C4631M (11/09)MOTION AREA SELECTIONYou configure the motion area at the application window. Use the bounding outline (dotted rectangle) to select m
C4631M (11/09) 15INSTANT RECORDING AND PLAYBACKThe instant recording feature allows you to start a manual recording session immediately from the live
16 C4631M (11/09)INSTANT PLAYBACKThe unit supports two playback modes, instant playback and playback. Instant playback is initiated from the live view
C4631M (11/09) 17PTZ IN LIVE VIEWThe DVR displays a control for operating PTZ cameras. The PTZ option must be configured for each camera to use the PT
18 C4631M (11/09)ACTIVATING PATTERNSA pattern is a user-defined, viewable camera path with a specified beginning and end. Patterns are made up of a se
C4631M (11/09) 19PTZ PATTERNSProgramming a Pattern1. Click SET. The camera is now in the programming mode.2. Click a number representing the pattern (
2 C4631M (11/09)
20 C4631M (11/09)ACKNOWLEDGING AN ALARM OR MOTION EVENTThe DX4104 allows you to manually acknowledge an event state that has activated a relay output.
C4631M (11/09) 21SYSTEM INFORMATIONThe System Information option displays system and hard disk information. To view all system information, you must b
22 C4631M (11/09)SEARCH VIDEOThe search feature allows you to use the date/time, event, and bookmark search feature to find and play back video stored
C4631M (11/09) 235. Click the Time box, and then select a time.6. Click the number box to select a playback channel.Figure 15. Selecting Playback Time
24 C4631M (11/09)Figure 17. Selecting Playback Time and Channels4. Click the Time settings box, and then right-click the box to enter a time setting (
C4631M (11/09) 25BOOKMARK SEARCHThe bookmark search feature allows you to search for and play back bookmarked video. You can also bookmark playback vi
26 C4631M (11/09)EXPORTING VIDEOThe DX4104 allows you to export data to CD/DVD or USB media. You can view the exported video on the unit or at the rem
C4631M (11/09) 27ConfigurationNOTE: The DX4104 is preconfigured for immediate operation. For a list of system defaults, refer to Appendix A: DX4104 Fa
28 C4631M (11/09)CAMERA MENUTo access the Camera menu options, click Camera.Figure 22. Camera MenuThe DX4104 allows you to configure the following pro
C4631M (11/09) 29PTZ MODEThe DX4104 supports up to four serial PTZ cameras. Multiple PTZ cameras can be connected and controlled individually by daisy
C4631M (11/09) 3ContentsDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30 C4631M (11/09)VIDEO FORMAT1. From the Camera menu, click Video. 2. Click the Video Format box, and then select NTSC or PAL. (NTSC is the default.)
C4631M (11/09) 31ALARM RECORD MODEYou can configure each camera to record at a different resolution, quality, and image rate to capture alarm-triggere
32 C4631M (11/09)MOTION RECORD MODEThe unit supports multi-event recording. You can configure each camera to record at a different resolution, quality
C4631M (11/09) 33INSTANT MOTION RECORD MODEThe unit allows you to manually start and stop the instant recording mode. You can configure each camera to
34 C4631M (11/09)SCHEDULE MENUThe scheduling feature allows you to create daily, weekly, and holiday schedules for each channel. Up to 10 different ho
C4631M (11/09) 35COPYING SCHEDULESThe DX4104 supports four methods for copying schedules:• Weekday (M to F): The schedule from the highlighted day is
36 C4631M (11/09)Copying By Channel1. From the Schedule menu, click the source schedule day.2. Click a source channel.Figure 25. Selecting a Source Ch
C4631M (11/09) 374. Click OK. The on-screen keyboard appears.Figure 28. Naming a Holiday Schedule5. Click the settings box to enter the schedule name.
38 C4631M (11/09)4. Edit the holiday recording schedule settings for a channel.Figure 31. Editing a Holiday Recording Schedule5. Click Close.6. Click
C4631M (11/09) 39DISPLAY MENUTo access the Display menu options, click Display.OSD (ON-SCREEN DISPLAY)The DX4104 allows you to configure the following
4 C4631M (11/09)Linking Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40 C4631M (11/09)LINKING MENUThe Linking menu allows you to set up alarm inputs, motion inputs, and the relay output. NOTE: The prealarm and postalarm
C4631M (11/09) 41RELAY OUTPUT SETUPYou can configure how the relay output is controlled: alarm acknowledge or post-alarm time. The relay out OFF setti
42 C4631M (11/09)NETWORK MENUYou must configure the DVR network settings to use the following features:• Client software application: Allows you to op
C4631M (11/09) 43DDNS SETUPThe DDNS feature uses the services provided by No-IP™. Prior registration with No-IP to obtain a user name and password is
44 C4631M (11/09)• Mail Address (1 to 3): User’s e-mail address. Supports up to 24 characters including a to z, A to Z, numerals 0 to 9, and special c
C4631M (11/09) 45SYSTEM MENUThe system settings should be configured before the unit is put into service. Some of the settings affect how video data i
46 C4631M (11/09)NTP SETUPThe unit’s internal time can be synchronized with an external time source using the Network Time Protocol (NTP) Date/Time co
C4631M (11/09) 47USER ACCOUNT SETUPUser accounts can be added, changed, or deleted. By default, both the user name and password for user number 01 are
48 C4631M (11/09)Changing a User1. From the System menu, click User. The default is 01.Figure 33. Changing the Default Administrator Password2. Click
C4631M (11/09) 49Deleting a UserTo delete a user:1. From the System menu, click User.2. Click the Number box to select an ID.3. Click Delete. The user
C4631M (11/09) 5List of Illustrations1 Application Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 C4631M (11/09)Updating Over the NetworkTo update over the network:1. From the System menu, click Update.2. Click the Selection box, and then select
C4631M (11/09) 51• Format: Initializes all installed HDDs. The System Information dialog box lists the installed drives and their respective capacitie
52 C4631M (11/09)BACKUP SCHEDULE SETUPThe backup feature allows you to perform an instant backup of recorded data. It also allows you to configure the
C4631M (11/09) 53Instant BackupThe instant backup feature allows you to manually back up data. The backup settings unique to the instant backup mode a
54 C4631M (11/09)12. (Optional) To view the backup status:a. Exit the Setup menu.b. Click the System Information icon . Figure 37. Instant Backup Sta
C4631M (11/09) 55Weekly Backup ScheduleThe weekly backup feature allows you to perform an automatic backup of the current week’s data to a USB device
56 C4631M (11/09)Daily Backup ScheduleThe daily backup feature allows you to perform an automatic backup of recorded data to a USB device. You can con
C4631M (11/09) 57Erasing and Formatting MediaThe erase and format features allow you to format media for use with the DVR. Although media can be forma
58 C4631M (11/09)SYSTEMIR Remote IDThe infrared (IR) ID feature allows you to transmit a unique IR Remote ID (01 to 09) from the remote control to one
C4631M (11/09) 59Export/Import Configuration SettingsNOTE: Resetting the DVR to its factory defaults deletes the customized settings. To save the cust
6 C4631M (11/09)List of TablesA Supported PTZ Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60 C4631M (11/09)AppendicesAPPENDIX A: DX4104 FACTORY DEFAULTSNOTE: Resetting the DVR to factory defaults deletes the customized settings. To save the
C4631M (11/09) 61Display OSD Language ENGLISH Yes YesChannel Name ON Yes YesChannel Status ON Yes YesMain Monitor Dwell Time 2 SEC Yes YesSpot Monitor
62 C4631M (11/09)Network (Continued)Notification Alarm On OFF Yes YesMotion Detection OFF Yes YesDisk Full OFF Yes YesAdmin Password Changed OFF Yes Y
C4631M (11/09) 63System (Continued) User (Continued) Password admin YesUpdate Selection SYSTEM S/W Yes YesMethod USB Yes YesUpdate Server Unavailable
64 C4631M (11/09)APPENDIX B: DX4104 OPERATION METHODSThe manual describes how to use the mouse to operate and configure the unit. This appendix provid
C4631M (11/09) 65APPENDIX C: HARDWARE AND SOFTWARE UPGRADE POLICYPelco’s representations regarding product features and performance are limited to tho
66 C4631M (11/09)APPENDIX D: RECOVERING THE ADMINISTRATOR PASSWORD1. On the left side of the unit, locate and note the manufacturer’s serial number.2.
PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective inmaterial or workmanshi
Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel (800) 289-9100 Fax (800) 289-9150Internatio
C4631M (11/09) 7DescriptionThe DX4104 Series digital video recorder (DVR) is designed for the entry-level market. The unit provides one to four camera
8 C4631M (11/09)Product OverviewAPPLICATION WINDOWThe DX4104 is accessed through the graphical user interface (GUI). Use the mouse, remote control, or
C4631M (11/09) 9GUI TOOLBARThe GUI toolbar is used to access the Setup menu, dialog boxes, and controls that allow you to operate and configure the DV
Comentarios a estos manuales