Pelco DX7100 Manual de usuario

DX7100 SeriesDigital Video RecorderC642M (11/03)®OPERATION/PROGRAMMING

10 C642M (11/03) COLOR SETUPIf required, use this screen to adjust the contrast, brightness, and color level settings of a scene.Figure 3. Color Setu

C642M (11/03) 11 SCHEDULE SETUPTwenty-four group schedules can be programmed to include the following:Cameras to recordDay and time to recordRecording

12 C642M (11/03)2 START TIME – Program the time to start recording. If you want Group 1 to start recording at 6:30 in the morning, use thearrow keys a

C642M (11/03) 13SCHEDULING EXAMPLERecord four cameras with motion detection from Monday through Friday, 8:00 A.M. - 6:00 P.M.; Saturday, 8:00 A.M. - 2

14 C642M (11/03)Step 5 – Select Group 02 and set the START TIME to 8:00 and END TIME to 14:00.Step 6 – Check SAT in the DAY OF WEEK section.Step 7 –

C642M (11/03) 15 SPEED SETUPUse the Speed Setup window to program the recording rate for each camera and to program the pre-alarm function for motiona

16 C642M (11/03)NOTE: Items 4-9 affect the Normal, Motion, and Sensor menus. They should be set only once.4 IMAGE QUALITY Slider Bar – Sets the quali

C642M (11/03) 17132MOTION SPEED MENUFigure 6. Motion Speed Menu1 MOTION Button – Opens the motion speed menu. Use this menu to set motion detection a

18 C642M (11/03)132SENSOR SPEED MENUFigure 7. Sensor Speed Menu1 SENSOR Button – Opens the sensor speed menu. Use this menu to set the sensor detecti

C642M (11/03) 19 MOTION DETECTION SETUPMotion detection recording saves hard drive space and makes it easier to search and retrieve recorded data. Use

2 C642M (11/03)CONTENTSSection PageGETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 C642M (11/03) PASSWORD SETUPDX7100 has four levels of password protection to prevent unauthorized changes or use of the system. The following are t

C642M (11/03) 21 PAN AND TILT SETUPNo settings are required to set the pan and tilt protocol for the DX7100. The only protocol available is D protocol

22 C642M (11/03) UPDATE PROGRAMTo update system software, do the following:1. Click the Update Program button.2. Select the drive and folder with the

C642M (11/03) 23PRESETBUTTONSCAMERAPATTERN BAR PRESET BARFigure 11. PTZ MenusHOW TO OPERATE PTZTo control pan, tilt, and zoom functions and to set pa

24 C642M (11/03)PTZ CONTROLSTo operate pan/tilt/zoom functions on controllable systems, do the following:1. Select a camera.a. Move the mouse pointer

C642M (11/03) 25PATTERNSThe DX7100 can be programmed for one pattern for each camera. A pattern is a user-defined, viewable camera path with adefinite

26 C642M (11/03)PRESET TOURSA preset tour is a programmed sequential execution of multiple preset positions.HOW TO PROGRAM A PRESET TOUR1. Click the P

C642M (11/03) 27SEARCHTo search recorded data on the hard disk drive or internal CD-RW drive, click the SEARCH button located in the DISPLAY mode.The

28 C642M (11/03)5 Playback Buttons – Use to search saved data. In fast playback, the DX7100 plays back one camera at 16X normal speed,four cameras at

C642M (11/03) 29DATE AND TIME SEARCH1 Click the Camera button if the camera buttons are not shown in the lower-left corner of the screen.2 Select the

C642M (11/03) 3PRESETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 C642M (11/03)SLIDER SEARCHThe slider search is similar to the time and date search but provides additional information to help you narrow your sear

C642M (11/03) 31INDEX SEARCH1 Click the INDEX SEARCH button. A blank Index List (3) appears.2 Select the year, month, and day.3 Select the event type

32 C642M (11/03)HOW TO BACKUP VIDEO FILESVideo files can be backed up on an internal CD-RW drive.BACKUP WINDOWFigure 18. Backup (COPY) Window1 SELECT

C642M (11/03) 337STORAGE INDICATOR IS NOW LABELED BACKUPHOW TO BACKUP (COPY) TO THE CD-RW DRIVE1. From the DISPLAY mode of the DX7100, click the COPY

34 C642M (11/03)REMOTE SITE SOFTWAREDESCRIPTIONFree remote site software is included with the DX7100 to provide remote site viewing of live and record

C642M (11/03) 35Figure 21. Setup Screen1 Date and Time Indicator – Displays current date and time on the local machine.2 CLIENT ADMIN PASSWORD Box —

36 C642M (11/03)7 ADDRESS Box – Enter the IP address or phone number of the site.8 CONNECTION PASSWORD Box – Enter the Connection User password of the

C642M (11/03) 37Figure 22. On-Line Mode1 Date and Time Indicator – Displays current date and time.2 SEARCH Button – Searches and plays back recording

38 C642M (11/03)7 RELAY OUTPUT Buttons – Turn relays connected to DX7100 DVR on or off.8 DOMAIN/IP ADDRESS Text Box – Displays address of domain site.

C642M (11/03) 39Figure 23. PTZ ControlsDOWNCAMERARIGHTLEFTUPPTZ CONTROL MODETo operate pan, tilt, and zoom functions on controllable systems, do the

4 C642M (11/03)LIST OF ILLUSTRATIONSFigure Page1 Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40 C642M (11/03)PATTERNSThe DX7100 can be programmed for one pattern. A pattern is a user-defined, viewable camera path with a definite beginningand e

C642M (11/03) 41PRESETSA preset is a user-defined camera position using pan, tilt, zoom, and focus commands. The DX7100 Series DVR has programmingcapa

42 C642M (11/03)Figure 25. Pattern and Preset BarsPATTERN BAR PRESET BARPRESETBUTTONSCAMERAPRESET TOURSA preset tour is a programmed sequential execu

C642M (11/03) 43Figure 26. Search Mode1 Date and Time Indicator – Displays current date and time.2 Search Date Selection Boxes – Select month and yea

44 C642M (11/03)7 FDD Button – Saves recorded image to 3.5-inch diskette. Playback must be stopped before button can be used. Print Button – Prints i

C642M (11/03) 45DATE AND TIME SEARCH1Click the Calendar button if the calendar is not shown in the lower-left corner of the screen.2 Enter the year an

46 C642M (11/03)Figure 28. Slider Searcha1223SLIDER SEARCHThe slider search is similar to the time and date search but provides additional informatio

C642M (11/03) 47REMOTE UPDATESOFTWARE UPDATE1. Click the Remote Update button.2. Enter the Administrator Password if there is one for the remote site.

48 C642M (11/03)Figure 31. Emergency Agent WindowEmergency Agent software alerts the remote site client of any triggered alarm at the surveillance si

C642M (11/03) 49BACKUP VIEWER SOFTWAREUse the Backup Viewer software to search images stored on a CD-ROM or hard drive on your computer.HOW TO INSTALL

C642M (11/03) 5GETTING STARTEDYou will need to install your unit before using this manual. Refer to the installation manual supplied with theDX7100.On

50 C642M (11/03)Figure 33. Backup Mode Selection3. Select the number of cameras you want to view.4. Select the media type, either CD-ROM or HDD. DAT

C642M (11/03) 51Figure 34. Backup Viewer1 Date and Time Indicator – Displays current date and time.2 Year and Month Selection Boxes – Displays the ye

52 C642M (11/03)6 EXIT Button – Exits Backup Viewer.7 Playback Buttons8 Close CD Tray Button – Closes CD tray. Playback must be stopped before button

C642M (11/03) 532b3c4d5e6a1DATE AND TIME SEARCH1Click the Camera button if the camera buttons are not shown in the lower-left corner of the screen.2 S

54 C642M (11/03)SLIDER SEARCHThe slider search is similar to the time and date search but provides additional information to help you narrow your sear

C642M (11/03) 5512BACKUP VIEWER INDEX SEARCH1Click the INDEX SEARCH button.2 A blank Index List appears.Select the event type (motion or sensor) to se

56 C642M (11/03)WATERMARK TOOLThe Watermark Tool allows you to verify if an original image has been altered. The Watermarking Viewer software is avail

C642M (11/03) 57Figure 38. The Image Has Not Been AlteredFigure 39. The Image Has Been Altered

58 C642M (11/03)AVI BACKUPAVI files can be made in the SEARCH mode of the server, the ON LINE and SEARCH modes of the remote site software, andfrom th

C642M (11/03) 59REVISION HISTORYManual # Date CommentsC642M 11/03 Original version.® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, Legacy

6 C642M (11/03)Figure 1. Display Mode1 Camera Name and Recording Status – The colored circle located to the right of the on-screen camera name indica

World Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax: 1-5

C642M (11/03) 77 COPY Button (Backup) – Click the COPY button to format a CD-RW disk and to copy data to the internal CD-RW drive.Refer to the section

8 C642M (11/03)SYSTEM SETUPTo set up the DX7100 digital video recorder, click the SETUP button located in the DISPLAY mode. The SETUP mode appears ont

C642M (11/03) 9Figure 2. Camera Setup Menu1 CAMERA NAME Box – To name a camera click the camera selection button for that camera. Up to 70 characters