Pelco C1619M-I Manual de usuario

INSTALLATIONC1619M-I (11/07)INSTALLATIONEndura® Workstation

10 C1619M-I (11/07)Equipment Placement and Rack MountingThe Endura workstation can be placed on a flat surface, such as a desktop, or mounted in an eq

C1619M-I (11/07) 11RACK MOUNTINGThe Endura workstation mounts into an industry-standard 19-inch (48 cm) equipment rack. The Endura workstation occupie

12 C1619M-I (11/07)5. If installing unit into a square-hole rack: Insert 10 cage nuts into the square-hole rack as shown in Figure 7.Figure 7. Insert

C1619M-I (11/07) 13Figure 8. Attaching Support Rails7. Repeat step 6 for the second support rail assembly.8. Tighten the 8-32 x 0.375-inch Phillips t

14 C1619M-I (11/07)9. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and

C1619M-I (11/07) 15Connections1. Connect video output.The Endura workstation can support two video outputs to a digital video interface (DVI) output.

16 C1619M-I (11/07)Figure 12. Front Panel of Endura Workstation (Bezel Open)POWER INDICATOR03267-39-0020SNPRODUCT SERIAL STICKERNUMBERDVD/CDDRIVECPU

C1619M-I (11/07) 17OperationRefer to the WS5000 Operation manual for details on how to configure and operate the system. Do not install other software

18 C1619M-I (11/07)Updating the WS5000 Advanced System SoftwareThe WS5000 advanced system software is updated frequently as Pelco continues to refine

C1619M-I (11/07) 19TroubleshootingConsult the WS5000 Operation manual (C1624M) for detailed information on setting up devices that are attached to the

20 C1619M-I (11/07)SpecificationsSYSTEMProcessor Intel® Xeon® X3220Internal Memory 2 GB RAMOperating System Microsoft Windows XP Professional Service

C1619M-I (11/07) 21FRONT PANELDVD±RW/CD-RW Drive CD read/write speed: 24XCD rewrite speed: 24XDVD read/write speed: 8XDVD dual layer read/write speed:

22 C1619M-I (11/07)

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material orworkmanshi

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

4 C1619M-I (11/07)List of Illustrations1 Major Package Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C1619M-I (11/07) 3ContentsRegulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C1619M-I (11/07) 5Regulatory NoticesThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

6 C1619M-I (11/07)DescriptionThe Endura® workstation is a high-end personal computer designed to deliver optimum performance for the WS5000 advanced s

C1619M-I (11/07) 7Before You BeginEndura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, a

8 C1619M-I (11/07)PACKAGE CONTENTSThe following diagrams show the contents of the two boxes. When installing the Endura workstation, refer to these di

C1619M-I (11/07) 9Figure 3. Rack Mount KitPRODUCT SERIAL NUMBER LABEL PLACEMENTProduct serial number labels help Pelco’s Product Support identify you